NMEA 0183 / 2000

Your whole boat,
on one screen.

SeaVectors joins your boat’s instrument network over Wi-Fi and turns depth, wind, speed, heading, engines, tanks and batteries into live widgets beside the chart.

Free for 1 month, then $29.99/year or $5.99/month. Cancel anytime.

How it connects

Your sensors already talk NMEA. A Wi-Fi gateway on the network shares that data with your iPhone or iPad — over TCP or UDP, with no internet and no account.

Sensors NMEA 2000 / 0183 Wi-Fi gateway SeaVectors
  1. 1

    Join the boat’s Wi-Fi

    Connect your iPhone or iPad to the gateway’s network. Nothing leaves the boat, and no internet is needed.

  2. 2

    Settings → NMEA Gateway

    Turn on Connect to gateway.

  3. 3

    Pick TCP or UDP

    Your gateway’s manual says which. Not sure? Try UDP first: there’s no address to get wrong, only the port. TCP needs the gateway’s IP address and port.

  4. 4

    Enter the port

    10110 B&G, Simrad, Lowrance, ShipModul · 2000 Digital Yacht, Quark-elec · 1456 Yacht Devices · 39150 Vesper.

  5. 5

    Read the status dot

    Red not connected · orange connecting · yellow connected, waiting for data · green data is flowing.

  6. 6

    Check what arrives

    Settings shows the format it found (NMEA 0183, 2000 or both), a running sentence count and the last raw message. Then open the instrument panel.

Yacht Devices YDWG-02

It serves NMEA 0183 and raw NMEA 2000 on separate ports at the same time. Turn on RAW for a data server in its web page and use that port to get each engine, tank and battery separately.

Actisense W2K-1 / W2K-2

Run it in NMEA 0183 mode; its own raw NMEA 2000 format isn’t read.

B&G, Simrad and Lowrance plotters

Turn on NMEA 0183 over Ethernet/Wi-Fi in the plotter’s network settings, then use port 10110.

Several phones and tablets

UDP lets any number of devices listen at once; TCP gateways usually allow about three connections.

Devices that work

Anything that serves NMEA 0183 sentences or raw NMEA 2000 over Wi-Fi works. These are the ones we name.

Wi-Fi gateways

The best experience. Add one to your NMEA 2000 backbone or 0183 network and it hears every sensor.

Yacht Devices YDWG-02YDWN-02YDWR-02Digital Yacht WLN10 SmartNavLink2Actisense W2K-1 / W2K-2WGX-1ShipModul MiniPlex-3WiQuark-elec QK-A032Signal K / OpenPlotter

AIS transponders with Wi-Fi

Stream AIS traffic and GPS straight to SeaVectors.

Vesper XB-8000Vesper Cortex M1em-trak B952 / B954

Plotters that share NMEA

Turn on NMEA 0183 over Ethernet/Wi-Fi on the plotter, port 10110.

B&G Zeus / VulcanSimrad NSS / NSO / GOLowrance HDS / Elite

Garmin, Raymarine, Furuno or Humminbird? Their Wi-Fi only talks to their own apps. Add any gateway above to the NMEA 2000 backbone; it reads every sensor directly, without the plotter’s help.

What it reads

Navigation

Position, course and speed over ground, heading, rate of turn, heel and pitch.

Depth and speed

Echo-sounder depth, speed through water, trip and total log.

Wind and environment

True and apparent wind, sea and air temperature, barometer with trend.

Engines, tanks and batteries

RPM, coolant, hours, fuel rate, tank levels and battery voltage — for each engine, tank and battery.

It stays on your boat

No login, no cloud. The data travels only over the boat’s own Wi-Fi, so it works far offshore.

Smart widgets

The instrument panel builds itself from what your boat sends.

They appear on their own

A second engine, house battery or water tank gets its own tile, such as RPM 2, BATTERY 2 and TANK 2.

You know where each number comes from

A badge on every tile shows its source: your instruments over NMEA, or the phone’s GPS.

Trends, not just numbers

Tanks and batteries draw a level trace, and the barometer shows which way it’s heading.

Alerts built in

Danger, fishing closure, restricted area and AIS tiles turn red the moment something needs you.

Laid out your way

Open the full-screen dashboard, then drag, resize or hide tiles. Tap any tile to see what it measures.

Grouped pages

Navigation, weather, engine, fuel, battery, NMEA and alert pages, or everything on one screen.

If it doesn’t connect

Watch the full recording

Guides and support

Step-by-step articles and field notes on seavectorsapp.com.

Bring your instruments to the chart.

Every feature in one plan, with your first month free.

Yearly Save 58% Limited time

$29.99/year

Just $2.50 a month

Monthly

$5.99/month

Cancel anytime

Start your free month

See every feature AIS alerts Auto routing Compare apps